Long range wireless receiver

YET402PC Two channel wireless receiver

Working volts is AC 110-220V, 433mhz frequency,suitable for switch signal control(relay dry contact output). It support fixed code,learning code or rolling code, remote capacity is different. Fixed code and leanring code 60pcs, rolling code 30pcs.

Product Function Description

How to learn?

Learning code, fixed code, HT6P20B, HT6P20D: Press the learning button on the controller, the LED Light is on, release the learning button, the LED Light is off, enter the learning state; press any key of the remote control to be learned, the LED Light flashes several times and then goes out, indicating that the learning is successful.

Rolling code: Press the learning button on the controller, the LED Light is on, release the learning button, the LED Light is off, enter the learning state, press any key of the remote control you want to learn, the LED Light flashes, press the learn button on the controller again, the LED Light is off, press the same button on the remote control, the LED Light flashes several times and then goes out, indicating that the learning is successful.

Clear Code:

Long press (more than 5S) the learning button on the controller until the LED Light is off, and the controller will automatically clear all stored codes.

Output method selection:

A. Signal delay (3S): jumper inserted on 1*

B. Signal toggle: jumper inserted on 2*

C. Signal latched: jumper inserted on 3*

D. Signal momentary: not insert jumper

Note: 1, 2, 3 plug-in method see (wiring diagram)